Usually, the diodes used by most people are made of silicon as the raw material, but the recently popular silicon carbide diodes are those made of silicon carbide as the raw material.
Categories：Product knowledge Date：2024-11-14 Hits：466 View »
Usually, the diodes used by most people are made of silicon as the raw material, but the recently popular silicon carbide diodes are those made of silicon carbide as the raw material.
Categories：Product knowledge Date：2024-11-14 Hits：368 View »
Schottky diode is a type of diode that utilizes Schottky barrier technology, compared to ordinary PN junction diodes.
Categories：Product knowledge Date：2024-11-14 Hits：366 View »
This type of suppressor has the characteristic of "electric pry" and is usually related to 4-layer NPNP silicon controlled bipolar devices or plasma gas/GDT devices.
Categories：Product knowledge Date：2024-11-14 Hits：363 View »
If the copper foil fracture caused by improper operation of the circuit board is not remedied, the cost of scrapping a PCB is not small. Therefore, in order to reduce losses, we can perform flying wire treatment at the copper foil fracture site, that is, connecting the two sides of the fracture with copper wire to connect the circuit. If it is a little detached, it is recommended to use a small knife or other small tool to scrape off the insulation paint on the copper foil, as long as the copper
Categories：Product knowledge Date：2024-11-07 Hits：424 View »
If the copper foil fracture caused by improper operation of the circuit board is not remedied, the cost of scrapping a PCB is not small. Therefore, in order to reduce losses, we can perform flying wire treatment at the copper foil fracture site, that is, connecting the two sides of the fracture with copper wire to connect the circuit. If it is a little detached, it is recommended to use a small knife or other small tool to scrape off the insulation paint on the copper foil, as long as the copper
Categories：Product knowledge Date：2024-11-07 Hits：356 View »
In terms of their conductivity, various substances in nature can be divided into three categories: conductors, insulators, and semiconductors.
Categories：Product knowledge Date：2024-11-07 Hits：383 View »
The N-channel MOSFET has an N-channel region located between the source and drain terminals.
Categories：Product knowledge Date：2024-11-07 Hits：421 View »
In order to solve the problem of MOS transistor heating, it is necessary to accurately determine whether it is caused by the above reasons, and more importantly, to correctly test the power loss of the switching transistor in order to identify the problem and find the key points for improvement.
Categories：Product knowledge Date：2024-11-07 Hits：421 View »
The full name of MOS in English is MOSFET, where the suffix FET stands for Field Effect Transistor.
Categories：Product knowledge Date：2024-11-07 Hits：474 View »
